Pay attention to what blade is used to cut tiles

1、 What should I pay attention to when cutting ceramic tile

1. First of all, many people will use a glass knife to cut ceramic tiles, which is also possible. But at present, not all ceramic tiles in the market can be cut with a glass knife. The microcrystalline and vitrified bricks in the market can be cut with a glass knife. If they are antique bricks or wear-resistant bricks, it can not be cut with a glass knife. It can only be cut with a cutting machine or an alloy steel knife. The glass knife should pay attention to several aspects when cutting tiles, The maximum number of strokes is two, and it is not allowed to repeat multiple strokes on a seam. The force should be uniform. The angle of the glass knife should be consistent, about 70 degrees is the best. The guiding rule should be firmly stepped on and not loose. When separating the tiles, the padding should not be too high. Generally, the cement nail should be used, and the left and right forces should be uniform. In short, the glass knife needs experienced technicians to cut the tiles, not everyone can cut them, Even if it is cut, it can not meet the use requirements

2、 What kind of blade is used to cut tiles

1. At present, the ceramic tile cutting needle is widely used, and such tools are mainly used for ceramic tile marking. The way to cut the ceramic tile with a scribe is to hold the scribe firmly with your hand, then press it down firmly, align and hold it with a square at the part to be cut, and then slide it in one direction, and then cut the glaze layer on the surface of the ceramic tile for two times, soak the water at the cut joint, and then place the ceramic tile cut joint at a certain table top or right angle of the table top, press the table top firmly with one hand, and gently break the hanging end to break the ceramic tile.

2、 What kind of blade is used to cut tiles

1. At present, the ceramic tile cutting needle is widely used, and such tools are mainly used for ceramic tile marking. The way to cut the ceramic tile with a scribe is to hold the scribe firmly with your hand, then press it down firmly, align and hold it with a square at the part to be cut, and then slide it in one direction, and then cut the glaze layer on the surface of the ceramic tile for two times, soak the water at the cut joint, and then place the ceramic tile cut joint at a certain table top or right angle of the table top, press the table top firmly with one hand, and gently break the hanging end to break the ceramic tile.